Basket Filter Foam Liner

Basket Filter Foam Liner

Skip to product information
1 of 5
Was: $15 Today: $12

Make maintaining your RevAir easy! Add an easy-to-wash foam liner into your stainless filter and your filter cleaning becomes a snap.

Two washable foam liners are included so you will always have a fresh spare on hand.

Note: Before inserting the foam liner into the stainless mesh filter, be certain to start with a freshly scrubbed stainless mesh filter.

FILTER CARE

ESSENTIAL REVAIR MAINTENANCE

Keeping your stainless steel filter clean is essential to maintain the top performance of your RevAir Reverse-Air Dryer.

Removing hair and dust from the stainless filter is not enough but removing and scrubbing with soapy water can be time-consuming.

Now you can save time by adding a washable foam liner to a squeaky clean stainless filter and make filter cleaning a breeze.

The foam liner acts as a barrier to protect the stainless steel filter and minimize build up on the mesh.

RevAir recommends cleaning foam liner every 5 uses by removing any loose hair, rinsing with warm soapy water, and air drying.

Foam liners are sold in packs of 2, so you will always have a fresh, clean spare while the other is drying.

TIME TO CLEAN

SIGNS IT IS TIME TO CLEAN

  1. You begin to experience less tension (suction) on your usual tension setting.
  2. The wand mouth seems hotter than normal.
  3. Your overall results are less sleek and silky in appearance.
  4. You notice the wand heat shuts off during use, even after reducing your section size.
SPECIFICATIONS
MATERIAL

Polyurethane Filter Foam

SIZE

3-inch tall x 2.9-inches wide

Essential RevAir Maintenance

Keeping your stainless steel filter clean is essential to maintain the top performance of your RevAir Reverse-Air Dryer.

Removing hair and dust from the stainless filter is not enough but removing and scrubbing with soapy water can be time-consuming.

Now you can save time by adding a washable foam liner to a squeaky clean stainless filter and make filter cleaning a breeze.

The foam liner acts as a barrier to protect the stainless steel filter and minimize build up on the mesh.

RevAir recommends cleaning foam liner every 5 uses by removing any loose hair, rinsing with warm soapy water, and air drying.

Foam liners are sold in packs of 2, so you will always have a fresh, clean spare while the other is drying.

Signs it is time to clean

  • You begin to experience less tension (suction) on your usual tension setting.
  • The wand mouth seems hotter than normal.
  • Your overall results are less sleek and silky in appearance.
  • You notice the wand heat shuts off during use, even after reducing your section size.

Material

Polyurethane Filter Foam

Size

3-inch tall x 2.9-inches wide

View full details

What Others Are Saying

Don’t take our word for it... this is what #realusers have to say about @myrevair