Searching for something?

RevAir

Stainless Mesh Filter Basket

Spare / Replacement

Always be ready to Rev! Ideal for use when your other Filter is being cleaned (yes, you need to do that) or as a backup for multi-user households.

Cleaning your Filter is essential to not only achieve your best results but to maintain the integrity of your RevAir Reverse-Air Dryer.

Made of stainless steel and dishwasher safe, clean up is a breeze.

WHEN TO REPLACE

IT MAY BE TIME TO REPLACE IF:

  1. If the filter gasket has become deformed (the area around the opening of the filter basket).
  2. If the filter screen has become punctured or damaged.
  3. If the filter has become physically broken in any way.
  4. If you prefer to have a spare filter on hand for use between cleanings.
FILTER CARE

ESSENTIAL REVAIR MAINTENANCE

Cleaning your Filter is essential to not only achieve your best results but to maintain the integrity of your RevAir Reverse-Air Dryer.  Removing hair and dust from the device is not enough.

We recommend emptying your filter every 2-3 uses and washing/scrubbing your filter after every 5 uses.

When using RevAir in conjunction with smoothing & finishing products, you may need to clean the Filter more frequently.

RevAir Base Filter Access

ACCESS YOUR FILTER

Unplug the Base Unit.

Unlock the Filter panel at the base of the hose and remove the Filter.

REMOVE YOUR FILTER

Remove and dispose of any dust or hair that may have accumulated inside the Filter.

RevAir Base Filter Removed
RevAir Filter Basket in Dishwasher

WASH/SCRUB YOUR FILTER

With the open side up, run the Filter through the wash cycle in the Top Rack of your dishwasher.

No dishwasher? Simply scrub the Filter with hot water, a toothbrush, and mild dishwashing liquid.

A CLEAN FILTER SCREEN IS KEY

Check Filter Screen for residual product build-up. When your filter is clean light will be able to be seen through the filter screen.

RevAir Dirty vs. Clean Filter Basket
RevAir Filter Basket Installation

REINSTALL YOUR FILTER

Allow the filter to completely air dry before reinstalling.

Place the Filter into the Base Unit Housing, making sure the Filter notch aligns with the Base Unit.

TIME TO CLEAN

SIGNS IT IS TIME TO CLEAN

  1. You begin to experience less tension (suction) on your usual tension setting.
  2. The wand mouth seems hotter than normal.
  3. Your overall results are less sleek and silky in appearance.
  4. You notice the wand heat shuts off during use, even after reducing your section size.
SPECIFICATIONS
MATERIAL

Stainless Steel Mesh

What Others Are Saying

Don’t take our word for it... this is what #realusers have to say about @myrevair