RevAir Exhaust Filter Spare/Replacement
RevAir Exhaust Filter Spare/Replacement
Exhaust Filter in the Air Outlet (on back of Base) for noise suppression and additional air filtration. details
IT MAY BE TIME TO REPLACE IF:
- Your exhaust filter shows any signs of damage.
- If you prefer to have a spare filter on hand for use between cleanings.
Device Maintenance
We recommend you clean the Exhaust Filter once per month.
1. Remove Exhaust Filter
To remove the Exhaust Filter simply pinch the sides together and gently pull to remove the filter from it’s housing within the Base.
2. Clean Exhaust Filter
After removing the Exhaust Filter, blow off any dust and rinse well with warm (not hot) water. Do not wring or twist. Gently shake out any excess water, place on a cloth or paper towel, and allow to air dry.
3. Reinstall Exhaust Filter
When completely dry, insert the Exhaust Filter back into the Base, in the original orientation. While gently pinching the sides, press the filter back into the Base.

SIGNS IT IS TIME TO CLEAN
- You begin to experiencing less tension (suction) on your usual tension setting.
- The wand mouth seems hotter than normal.
- Your overall results are less sleek and sikly in apperance.
- You notice the wand heat shuts off during use, even after reducing your section size.
MATERIAL
Polyurethane Filter Foam
SIZE
3.2 in. x 2.4 in. x in."
-
WHEN TO REPLACE
IT MAY BE TIME TO REPLACE IF:
- Your exhaust filter shows any signs of damage.
- If you prefer to have a spare filter on hand for use between cleanings.
-
FILTER CARE
Device Maintenance
We recommend you clean the Exhaust Filter once per month.
1. Remove Exhaust Filter
To remove the Exhaust Filter simply pinch the sides together and gently pull to remove the filter from it’s housing within the Base.
2. Clean Exhaust Filter
After removing the Exhaust Filter, blow off any dust and rinse well with warm (not hot) water. Do not wring or twist. Gently shake out any excess water, place on a cloth or paper towel, and allow to air dry.
3. Reinstall Exhaust Filter
When completely dry, insert the Exhaust Filter back into the Base, in the original orientation. While gently pinching the sides, press the filter back into the Base.
-
TIME TO CLEAN
SIGNS IT IS TIME TO CLEAN
- You begin to experiencing less tension (suction) on your usual tension setting.
- The wand mouth seems hotter than normal.
- Your overall results are less sleek and sikly in apperance.
- You notice the wand heat shuts off during use, even after reducing your section size.
-
SPECIFICATIONS
MATERIAL
Polyurethane Filter Foam
SIZE
3.2 in. x 2.4 in. x in."

RevAir + Producł Benefits
RevAir works synergistically with the RevAir Tribology Haircare Collection.
When the hair is in the Wand and Hose it is subject to a negative pressure or a vacuum environment.
When Tribology Haircare Products are applied before your RevAir session, the natural flow of the reverse-air helps to lay down cuticles over the beneficial ingredients while the negative pressure environment helps to infuse these ingredients into the hair.
SHOP DEVICES